Injection molded billets up to 8 1/4"
	Compression molded billets up to 24"
	Basic Shapes: rods, tubes, sheet
	Products: seals, gaskets, back-ups, machine parts
	Traceability: lot/batch, curedate
	Blends: virgin, glass, bearing grade

TYPICAL PROPERTIES - VPEEK-IM
Specific Gravity	1.32g/cm3
Tensile Strength (ASTM D-638)
73 degrees F	14,100 psi
482 degrees F	1,740 psi
Elongation (ASTM D-638)
Break	60% min
Yields	5%
Flexural Strength (ASTM D-790)
73 degrees F	24,000 psi
248 degrees F	14,500 psi
480 degrees F	1,880 psi
Flexural Modulus (ASTM D-790)	600,000 psi
Shear Strength (ASTM D3846 73°F)	7,600 psi
Izod Impact .01" Notch(ISO 180 73°F)	1.12 ft-lbs/in
Unnotched	No break
Hardness M Scale	90

TYPICAL PROPERTIES - 30GF/PEEK-IM
Specific Gravity	1.49 g/cm3
Tensile Strength (ASTM D-638)	22,800 psi
Elongation (ASTM D-638)	1-3%
Compressive Strength (ASTM D-695)	31,175 psi
Flexural Strength (ASTM D-790)	34,000 psi
Izod Impact (cut notched, ASTM D-256)	1.8 ft-lbs/in
Izod Impact (unnotched, ASTM D-256)	15.0-16.0 ft-lbs/in
Temperature Limits (°F):
Heat Deflection (ASTM D-648)	600
Continuous Use Temp	480

30GF/PEEK-IM is an injection molded PEEK material incorporating glass fiber as a filler. Typical application are structural or insulative requiring higher strength with higher temperature performance in many corrosive environments.

Note: The above data is to be used as a guide only and is based on our experience to date.